Robotics
Plan robot motion, size a drive and estimate the power your build needs.
Start here
DH Parameters Matrix Calculator
Turn a DH table into link matrices and the tool's pose
Forward Kinematics 2R Arm Simulator
See where a two-link arm reaches from its joint angles
Inverse Kinematics 2R Arm Calculator
Find planar arm joint angles for a target position
Robotic Arm Joint Torque Calculator
Estimate static holding torque for a horizontal two-link arm
Robot Drive Speed & Torque Calculator
Estimate wheel speed and drive torque for a wheeled robot
PID Tuning Helper
Get suggested PID gains and preview a model's step response
All robotics tools
Arm kinematics and geometry
Motors and drive systems
Power and flight
Control and orientation
Learn by doing
Useful guides
- DH Parameters Explained with a Worked Example
- Sizing Robot Drive Motors: Torque and RPM
- How to Choose a LiPo Battery: S, mAh and C
- How to Tune a PID Controller, Step by Step
- Drone Flight Time Calculation, Step by Step
- Brushless Motor KV to RPM, Explained
- Propeller Thrust: How Size and Power Trade Off
- Quaternion to Euler Angles for IMUs
- Steps per mm: How to Calculate and Calibrate
- H-Bridge Power Loss: MOSFET Heat, Worked Out
Common questions
How do I choose between the arm calculators?
Use forward kinematics to find the end position from joint angles, inverse kinematics to find angles for a target, and DH parameters for a chain described by Denavit–Hartenberg frames.
Are motor and battery results exact predictions?
No. They are estimates under the assumptions stated on each tool. Real friction, efficiency, loads, battery condition and operating temperature can change the result.
Where are propeller and LiPo calculations?
The complete list below includes propeller thrust, motor KV and RPM, drone flight time, battery runtime and LiPo charging tools alongside the arm and drive calculators.