ToolSphere
Back to all articles
robotics

Propeller Thrust: How Size and Power Trade Off

2026-10-206 min read

Try it: free Propeller Thrust Calculator

Estimate static propeller thrust from shaft power and diameter

Open →

A propeller makes thrust by pushing air down. Push a lot of air gently or a little air hard, and you get the same thrust; but pushing a lot of air gently costs far less power. That one idea explains why helicopters have huge rotors and why a camera drone with 15-inch props flies for 40 minutes while a 5-inch racer manages four.

The formula

Momentum theory gives static thrust (hovering, no forward speed) from the power at the shaft:

T = (FM × P × √(2 × ρ × A)) ^ (2/3)
Symbol Meaning Typical value
T thrust, in newtons (÷ 9.807 × 1000 for grams)
P shaft power, W
A disc area, π × D² ÷ 4, in m² 0.0507 m² for a 10" prop
ρ air density 1.225 kg/m³ at sea level
FM figure of merit: how close the prop is to ideal about 0.6 for multirotor props

The figure of merit lumps together everything a simple disc model can't see: blade shape, tip losses, drag. It's the one number to calibrate against a real thrust-stand test for your own prop.

What changes when you add power

A 10-inch prop, FM 0.6, sea level:

Shaft power Thrust Grams per watt
50 W 491 g 9.82
100 W 780 g 7.80
200 W 1,238 g 6.19
400 W 1,965 g 4.91

Thrust grows as power to the 2/3. Doubling the power gives only 2^(2/3) = 1.59× the thrust, and efficiency falls with every step. That's why hover efficiency matters so much for flight time: you want to hover low on this curve.

What changes when you change the prop

Same 100 W into different diameters:

Prop Disc area Thrust Grams per watt
5" 0.0127 m² 491 g 4.91
7" 0.0248 m² 615 g 6.15
10" 0.0507 m² 780 g 7.80
15" 0.1140 m² 1,022 g 10.22

Going from 5" to 10" (four times the disc area) gives 59% more thrust for the same power. Put the other way: to get 1,022 g from a 5-inch prop takes about 300 W, against 100 W for the 15-inch one.

Small props still have their place. They respond faster (less inertia), fit compact frames and produce high thrust in absolute terms, which is what racing and freestyle need. But for endurance, bigger and slower always wins.

Sizing a quad

A 1,200 g quad with four 10-inch props, each able to take 200 W:

max thrust = 4 × 1,238 g = 4,952 g
thrust-to-weight = 4,952 ÷ 1,200 = 4.1 : 1

Anything above 2:1 has enough authority to fly and recover; 4:1 is lively. Hover needs about 24% of the maximum thrust, which leaves plenty of headroom for wind and climbs.

Altitude and hot days

Thinner air means less thrust for the same power. At about 2,000 m the density is roughly 1.007 kg/m³, and the 100 W, 10-inch figure drops from 780 g to 730 g, 6% less. Hot days do the same. If you fly in the mountains, plan for the margin.

Common mistakes

  • Using electrical power instead of shaft power. The motor and ESC lose 15–25% on the way. 100 W from the battery might be 80 W at the prop.
  • Expecting thrust to scale linearly with power. It scales with power^(2/3).
  • Treating the estimate as a measurement. Pitch, blade count and shape all change real thrust; use FM to correct the model once you have test data.
  • Ignoring tip speed. A big prop on a high-KV motor is limited by current and tip speed, not by this formula (see the KV guide).

Try it

The propeller thrust calculator gives thrust, disc area and grams per watt from power, diameter and figure of merit, and checks thrust-to-weight for your build. Feed the grams-per-watt figure into the drone flight time calculator to see what it means for endurance.

Looking for other tools?

Explore ToolSphere Homepage →