ToolSphere
Back to all articles
converters

How Many Bags of Concrete Do You Need?

2026-11-117 min read

Try it: free Concrete Calculator

Estimate concrete volume and whole bags for your pour

Open →

Quick answer: concrete bag yields and yardage

Before measuring your forms, the most critical fact about pre-mixed concrete is that manufacturers rate bags by consolidated wet yield, not dry powder volume. When you mix dry cement, sand, and gravel with water, the water fills the voids between the aggregate particles rather than swelling the dry volume.

Here is the exact yield for standard pre-mixed concrete bags in the United States:

  • 80 lb bag: yields 0.60 cubic feet (0.0222 cubic yards). It takes 45 bags to pour 1 cubic yard.
  • 60 lb bag: yields 0.45 cubic feet (0.0167 cubic yards). It takes 60 bags to pour 1 cubic yard.
  • 40 lb bag: yields 0.30 cubic feet (0.0111 cubic yards). It takes 90 bags to pour 1 cubic yard.

Because 1 cubic yard equals 27 cubic feet (3 ft × 3 ft × 3 ft = 27 ft³), finding your required bag count requires three straightforward steps: determine the volume of your project in cubic feet, add a safety allowance for waste, and divide by the yield of your chosen bag size. You can verify your measurements and compare all bag options instantly with the concrete calculator.

The concrete calculation formula

Every concrete project breaks down into either rectangular prisms (slabs, pads, walkways, and strip footings) or circular cylinders (post holes, sonotube piers, and round columns).

Rectangular slabs and footings

For a slab, patio, or continuous footing:

Volume (cubic feet) = Length (feet) × Width (feet) × Depth (feet)

Always convert thickness or depth from inches into feet by dividing by 12. For instance, a standard 4-inch slab has a depth of 4 ÷ 12 = 0.3333 feet (1/3 ft), and an 8-inch footing has a depth of 8 ÷ 12 = 0.6667 feet (2/3 ft).

To convert cubic feet into cubic yards:

Cubic yards = Cubic feet ÷ 27

Cylindrical post holes and columns

For fence post holes, deck piers, or round footings:

Volume per hole (cubic feet) = π × (Diameter in feet ÷ 2)² × Depth in feet

For example, a 10-inch diameter post hole has a diameter of 10 ÷ 12 = 0.8333 feet and a radius of 0.4167 feet. The cross-sectional area is π × 0.4167² ≈ 0.5454 square feet. Multiply that area by the hole depth in feet to get the volume of one hole, then multiply by the total number of holes.

Why you must add a 10% waste allowance

Never purchase the bare geometric minimum volume. Concrete projects almost always require between 5% and 10% extra concrete (and up to 15% for rough-dug post holes or earth-formed trenches) for four practical reasons:

  1. Subgrade grade variations: Dirt or crushed gravel bases are rarely laser-flat. If the excavation dips even 1/4 inch deeper across a 100-square-foot slab, that low spot consumes roughly 2 additional cubic feet of concrete (more than three 80 lb bags).
  2. Form deflection and bowing: Wooden 2×4 or 2×6 forms flex outward under the hydrostatic pressure of wet, heavy concrete (which weighs about 145 to 150 lbs per cubic foot).
  3. Rough earthen sidewalls: Dug post holes and unformed trench footings have irregular dirt walls that bulge beyond the nominal auger or shovel diameter.
  4. Spillage and mixer residue: Wet paste inevitably clings to mixer drums, wheelbarrows, shovels, and screed boards.

Running short during a pour is disastrous: if fresh concrete sets before you can buy and mix more bags, the seam creates a weak cold joint where water and cracks will penetrate.

Worked Example 1: Concrete patio slab (12 ft × 10 ft, 4 inches deep)

Suppose you are pouring a backyard patio slab measuring 12 feet long, 10 feet wide, and 4 inches deep.

Step-by-step calculation:

  • Dimensions: Length = 12 ft, Width = 10 ft, Depth = 4 in = 4 ÷ 12 ft = 0.3333 ft.
  • Net volume: 12 ft × 10 ft × 0.3333 ft = 40.000 cubic feet (1.481 cubic yards, or 1.133 cubic meters).
  • Add 10% waste allowance: 40.000 ft³ × 0.10 = 4.000 ft³.
  • Total order volume: 40.000 + 4.000 = 44.000 cubic feet (1.630 cubic yards, or 1.246 cubic meters).

Bag counts needed (rounded up to the next whole bag):

  • 80 lb bags: 44.000 ÷ 0.60 = 73.33 → 74 bags
  • 60 lb bags: 44.000 ÷ 0.45 = 97.78 → 98 bags
  • 40 lb bags: 44.000 ÷ 0.30 = 146.67 → 147 bags

At 74 eighty-pound bags, the total dry material weight is 5,920 lbs (nearly 3 tons). This is near the practical threshold where many homeowners decide between renting a heavy-duty portable drum mixer with a crew of helpers or calling a ready-mix short-load delivery truck.

Worked Example 2: Continuous foundation footing (30 ft × 16 in × 8 in)

Suppose you are pouring a continuous strip footing for an addition or retaining wall that runs 30 feet long, 16 inches wide, and 8 inches deep.

Step-by-step calculation:

  • Dimensions: Length = 30 ft, Width = 16 in = 16 ÷ 12 ft = 1.3333 ft, Depth = 8 in = 8 ÷ 12 ft = 0.6667 ft.
  • Net volume: 30 ft × 1.3333 ft × 0.6667 ft = 26.667 cubic feet (0.988 cubic yards, or 0.755 cubic meters).
  • Add 10% waste allowance: 26.667 ft³ × 0.10 = 2.667 ft³.
  • Total order volume: 26.667 + 2.667 = 29.333 cubic feet (1.086 cubic yards, or 0.831 cubic meters).

Bag counts needed:

  • 80 lb bags: 29.333 ÷ 0.60 = 48.89 → 49 bags
  • 60 lb bags: 29.333 ÷ 0.45 = 65.19 → 66 bags
  • 40 lb bags: 29.333 ÷ 0.30 = 97.78 → 98 bags

With 49 bags of 80 lb concrete, you need just over 1 cubic yard. Because continuous trench footings often have loose soil on the bottom and sides, maintaining at least a 10% waste margin prevents leaving rebar exposed or having low spots along the grade.

Worked Example 3: Six post holes for a deck or pergola (10 in diameter, 36 in deep)

Suppose you are setting 6 posts for an outdoor deck or fence. Each hole is drilled with a 10-inch auger to a depth of 36 inches (3.0 feet) to stay below the local winter frost line.

Step-by-step calculation:

  • Dimensions per hole: Diameter = 10 in = 10 ÷ 12 ft = 0.8333 ft. Radius = 0.4167 ft. Depth = 36 in = 3.0 ft.
  • Cross-sectional area: π × (0.4167 ft)² = 0.5454 square feet.
  • Net volume per hole: 0.5454 sq ft × 3.0 ft = 1.636 cubic feet (0.0606 cubic yards).
  • Total net volume for 6 holes: 6 × 1.6362 ft³ = 9.817 cubic feet (0.364 cubic yards, or 0.278 cubic meters).
  • Add 10% waste allowance: 9.817 ft³ × 0.10 = 0.982 ft³.
  • Total order volume: 9.817 + 0.982 = 10.799 cubic feet (0.400 cubic yards, or 0.306 cubic meters).

Bag counts needed for all 6 holes:

  • 80 lb bags: 10.799 ÷ 0.60 = 17.998 → 18 bags (exactly 3 bags per hole)
  • 60 lb bags: 10.799 ÷ 0.45 = 23.998 → 24 bags (exactly 4 bags per hole)
  • 40 lb bags: 10.799 ÷ 0.30 = 35.997 → 36 bags (exactly 6 bags per hole)

What about post displacement?

A standard nominal 4×4 wooden post actually measures 3.5 inches by 3.5 inches. Submerging that post 36 inches into the hole displaces (3.5 ÷ 12) × (3.5 ÷ 12) × 3.0 ≈ 0.255 cubic feet of concrete per hole (about 1.5 cubic feet total across all 6 holes).

While you could theoretically subtract about two 80 lb bags for post displacement, experienced builders recommend keeping that volume as extra buffer. Auger holes frequently flare at the top, soil caves in slightly during drilling, and having a collar of concrete slightly mounded above ground level sheds rainwater away from the wood post to prevent rot.

Bags vs. ready-mix truck delivery: which should you choose?

When deciding how to source your concrete, consider both physical effort and economics:

  • Under 1 cubic yard (up to 45 bags of 80 lb): Pre-mixed bags are almost always the best choice. Batch plants typically charge an expensive short-load fee (often $100 to $200 extra) for truck deliveries under 3 to 4 cubic yards. You can transport bags in a pickup truck or have a home improvement pallet delivered to your driveway.
  • 1 to 2 cubic yards (45 to 90 bags): A middle ground. Mixing 50 to 80 bags by hand in a wheelbarrow is exhausting and risks inconsistent water ratios. If using bags, rent a mechanical barrel mixer (5 to 9 cubic foot capacity) and line up two or three people: one measuring water, one loading bags, and one wheeling and screeding.
  • Over 2 cubic yards (90+ bags): Order a ready-mix concrete truck. Hand-mixing 90+ eighty-pound bags takes several hours, and the first batches will begin setting before you finish pouring the slab, creating cold joints. Ready-mix trucks discharge an entire uniform batch in minutes.

Common mistakes when estimating concrete

  • Using dry bag volume instead of mixed yield: A dry bag occupies less space than its aggregate will fill once wet, or people assume 80 lbs equals 1 cubic foot (water weighs 62.4 lbs/ft³, but consolidated concrete weighs ~145 lbs/ft³, yielding only 0.60 ft³ per 80 lb bag).
  • Forgetting to convert inches to feet: Entering 12 × 10 × 4 produces 480 cubic feet (over 17 cubic yards) instead of the true 40 cubic feet. Always divide inches by 12.
  • Ordering zero waste: Ground settlement, form movement, and spills mean ordering exact geometric volume almost guarantees running out a few shovelfuls before the forms are full.
  • Adding too much water: Adding extra water makes concrete easier to pour and level, but drastically weakens cured compressive strength and causes surface scaling, dusting, and shrinkage cracks. Follow the manufacturer's specified water ratio (usually about 3 to 3.5 quarts per 80 lb bag).

Frequently asked questions

How many 80 lb bags of concrete make one cubic yard?

It takes exactly 45 eighty-pound bags to make one cubic yard of concrete. One cubic yard contains 27 cubic feet, and each standard 80 lb bag yields 0.60 cubic feet of mixed concrete (27 ÷ 0.60 = 45).

How many 60 lb bags of concrete make one cubic yard?

It takes exactly 60 sixty-pound bags to make one cubic yard of concrete. Each 60 lb bag yields 0.45 cubic feet of consolidated concrete (27 ÷ 0.45 = 60).

How many 40 lb bags of concrete make one cubic yard?

It takes exactly 90 forty-pound bags to make one cubic yard of concrete. Each 40 lb bag yields 0.30 cubic feet of wet concrete (27 ÷ 0.30 = 90).

How thick should a residential concrete slab be?

Standard residential patio slabs, sidewalks, and shed pads are 4 inches thick. For driveways, hot tub pads, or heavy equipment parking, increase slab thickness to 5 or 6 inches and reinforce the pour with welded wire mesh or a rebar grid.

How much extra concrete should I order for waste?

Add 10% extra concrete for standard wooden-formed slabs and rectangular footings. For rough-dug post holes, unformed dirt trench footings, or uneven ground excavations, increase the waste margin to 12% to 15%.

Can I mix different bag sizes together?

Yes, as long as they are the same product type (such as standard 4,000 psi concrete mix). Do not mix fast-setting concrete with standard concrete in the same batch, as their set times and water requirements differ significantly.

Why does an 80 lb bag only yield 0.60 cubic feet?

Consolidated concrete has a high density of approximately 145 to 150 pounds per cubic foot. Dividing 80 pounds by ~133–145 lbs per cubic foot of wet mixed material gives the standard manufacturer yield of 0.60 cubic feet.

How long should concrete cure before removing forms?

Wall and footing forms can typically be removed after 24 to 48 hours. Flat slab forms can be removed after 24 hours. Wait at least 7 days before placing light furniture or foot traffic, and allow a full 28 days for concrete to reach its rated compressive design strength.

How much water should I add to an 80 lb bag of concrete?

Most standard 80 lb concrete mixes require about 3 to 3.5 quarts (0.75 to 0.88 gallons) of clean water. Add about 90% of the water first, mix thoroughly, and add the remaining water in small increments until you reach a firm, workable oatmeal-like consistency.

How deep must post holes be for a fence or deck?

Post holes must extend at least 6 inches below your local frost line to prevent frost heave during freezing winter months. In non-freezing regions, a reliable rule of thumb is setting one-third of the total post length into the ground (for example, 24 to 30 inches deep for a 6-foot fence).

Use the Volume Converter to convert volume measurements before comparing quantities. For a related walkthrough, read Flooring Waste Factor: How Much Extra to Buy.

Looking for other tools?

Explore ToolSphere Homepage →